Northland Marine

Minn Kota 4" Brush Kit BT BRUSHKIT4.00BT

Part Number: BRUSHKIT4.00BT

Minn Kota 4" Brush Kit for Terrova BT, Ulterra, Ulterra BT, Ultrex BT, Riptide Terrova BT, Riptide Ulterra and Riptide Ulterra BT

Fits all of the following 80# thrust Minn Kota trolling motors with a shaft length up to 60" that have a 4" outside diameter lower unit;

  • Riptide Terrova BT models from 2017 - Present.  These models will be equipped with Blue Tooth and Lift Assist.
  • Riptide Ulterra models from 2016.
  • Riptide Ulterra models from 2017 - Present.  These models will be equipped with Blue Tooth.
  • Terrova BT models from 2017 - Present.  These models will be equipped with Blue Tooth and Lift Assist.
  • Ulterra models from 2015 - 2016.
  • Ulterra BT models from 2017 - Present.  These models will be equipped with Blue Tooth.

Parts included in this kit:

Quantity Part Number [Old Part Number(s)] Part Description
2 188-094 (186-094) Brush Assembly
2 975-041 (406-083) Brush Spring
1 9-738-015 Brush Plate Assembly
1 2889460 Seal Kit
2 880-025 (409461) Prop Shaft Seal
2 701-043 (409460) O Ring
2 701-009 (409462) Thru Bolt O Ring
2 830-027 (405-341, 409-340, 409-342) Brush Screw
2 973-025 (405-151, 409-150) Spacer
1 140-010 Ball Bearing
1 990-045 Thrust Spacer
1 990-052 Nylon Washer
1 990-051 Steel Washer
1 788-040 E Clip
2 992-010 Belleville Washer
1 640-022 Black Motor Leadwire
1 640-129 Red Motor Leadwire

Applicable Minn Kota trolling motors with a 72" shaft will need BRUSHKIT4.00BT72

If your Minn Kota trolling motor is not equipped with Blue Tooth, you will need BRUSHKIT4.00T or BRUSHKIT4.00(NEW)

Anytime a lower unit is reassembled, the thru bolts need to be tightened to 40 - 50 inch pounds for 4" diameter lower units.

Not sure if this part will fit your Minn Kota trolling motor?  Parts Diagrams

Frequently Bought Together