Northland Marine

Minn Kota 4" Brush Kit BT - 72" BRUSHKIT4.00BT72

Part Number: BRUSHKIT4.00BT72

Minn Kota 4" Brush Kit for Terrova BT, Ulterra, Ulterra BT, Riptide Terrova BT, Riptide Ulterra and Riptide Ulterra BT

Fits the following Minn Kota trolling motor models with 80 lbs thrust, a shaft length up to 72" and have a 4" outside diameter lower unit:

  • Minn Kota Riptide Terrova BT 80 models from 2017 - Present.  These models will be equipped with Bluetooth and Lift Assist
  • Minn Kota Riptide Ulterra 80 models from 2016
  • Minn Kota Riptide Ulterra BT 80 models from 2017 - Present.  These models will be equipped with Bluetooth
  • Minn Kota Terrova BT 80 models from 2017 - Present.  These models will be equipped with Bluetooth and Lift Assist
  • Minn Kota Ulterra 80 models from 2015 - 2016
  • Minn Kota Ulterra BT 80 models from 2017 - Present.  These models will be equipped with Bluetooth

Parts included in this kit:

Quantity Part Number [Old Part Number(s)] Part Description
2 188-094 (186-094) Brush Assembly
2 975-041 (406-083) Brush Spring
1 9-738-015 Brush Plate Assembly
1 2889460 Seal Kit
2 880-025 (409461) Prop Shaft Seal
2 701-043 (409460) O Ring
2 701-009 (409462) Thru Bolt O Ring
2 830-027 (405-341, 409-340, 409-342) Brush Screw
2 973-025 (405-151, 409-150) Spacer
1 140-010 Ball Bearing
1 990-045 Thrust Spacer
1 990-052 Nylon Washer
1 990-051 Steel Washer
1 788-040 E Clip
2 992-010 Belleville Washer
1 640-049 Black Motor Leadwire
1 640-149 Red Motor Leadwire

Applicable Minn Kota Trolling Motors with a shaft length of 45" - 60" will need BRUSHKIT4.00BT

If your Minn Kota trolling motor is not equipped with Bluetooth, you will need BRUSHKIT4.00T or BRUSHKIT4.00(NEW)

Anytime a lower unit is reassembled, the thru bolts need to be tightened to 40 - 50 inch pounds for 4" diameter lower units.

Not sure if this part will fit your Minn Kota trolling motor?  Parts Diagrams

Frequently Bought Together