Minn Kota 3-5/8" Brush Kit BRUSHKIT3.62

Part Number: BRUSHKIT3.62

Minn Kota Brush and Seal Kit for 3-5/8" Diameter Lower Units 1991 - Present

Fits all Minn Kota Trolling Motors that have a lower unit with an outside diameter of 3-5/8" with the exception of 70 pound thrust models built after 2018 or that have been upgraded to the Core 128 Armature Assembly. If your 70# thrust lower unit has a Core 128 Armature Assembly, you will need the BRUSHKIT3.62(70).

Typical thrust levels include 46-70 pounds.

Not sure if this kit will fit your trolling motor? Measure the outside diameter of the Plain End Housing and if it measures 3-5/8", this kit will fit your trolling motor.

Anytime a lower unit is reassembled, the thru bolts need to be tightened within 35 - 45 inch pounds for 3-5/8" diameter lower units.

Parts included in this kit:

Quantity	Part Number [Old Part Number(s)]	Part Description
2	188-037 (186-036, 188-036, 406-071)	Brush Assembly
1	2888460	Seal Kit
1	880-003 (406461)	Prop Shaft Seal
1	880-006 (406471)	Prop Shaft Seal w/ Shield
1	337-036 (406490)	Gasket
1	701-081 (405470, 406470)	O Ring
2	701-008 (406462)	Thru Bolt O Ring
1	738-036 (406-403, 406-406)	Brush Holder
2	975-040 (406-052, 409-080)	Brush Spring
1	140-010 (406-010)	Ball Bearing
1	725-050	Brush Holder
1	990-067	Steel Washer
2	990-070	Nylon Washer
1	788-015	E Clip
2	830-007	Brush Screw

Not sure if this part will fit your Minn Kota trolling motor? Parts Diagrams

Minn kota brush kit

Kit was perfect and shipped immediately

Good Kit

Kit is a perfect fit...made DIY simple and easy to replace...

Worked as it should. Motor is back in action.

Parts dropped in as oem parts would. Motor is back operating. A short on my negative terminal caused the system to overheat so when replacing this equipment, I would also recommend reterminated the + / - connectors which attach to the brushes.