Northland Marine

Minn Kota 3-5/8" Brush Kit BRUSHKIT3.62

Part Number: BRUSHKIT3.62

Minn Kota Brush and Seal Kit for 3-5/8" Diameter Lower Units 1991 - Present

Fits all Minn Kota Trolling Motors that have a lower unit with an outside diameter of 3-5/8" with the exception of 70 pound thrust models built after 2018 or that have been upgraded to the Core 128 Armature Assembly.  If your 70# thrust lower unit has a Core 128 Armature Assembly, you will need the BRUSHKIT3.62(70).

Typical thrust levels include 46-70 pounds.

Not sure if this kit will fit your trolling motor?  Measure the outside diameter of the Plain End Housing and if it measures 3-5/8", this kit will fit your trolling motor.

Anytime a lower unit is reassembled, the thru bolts need to be tightened within 35 - 45 inch pounds for 3-5/8" diameter lower units.

Parts included in this kit:

 Quantity

Part Number [Old Part Number(s)] Part Description
2 188-037 (186-036, 188-036, 406-071) Brush Assembly
1 2888460 Seal Kit
1 880-003 (406461) Prop Shaft Seal
1 880-006 (406471) Prop Shaft Seal w/ Shield
1 337-036 (406490) Gasket
1 701-081 (405470, 406470) O Ring
2 701-008 (406462) Thru Bolt O Ring
1 738-036 (406-403, 406-406) Brush Holder
2 975-040 (406-052, 409-080) Brush Spring
1 140-010 (406-010) Ball Bearing
1 725-050 Brush Holder
1 990-067 Steel Washer
2 990-070 Nylon Washer
1 788-015 E Clip
2 830-007 Brush Screw

Not sure if this part will fit your Minn Kota trolling motor?  Parts Diagrams

Customer Reviews

Based on 117 reviews
97%
(113)
3%
(4)
0%
(0)
0%
(0)
0%
(0)
B
Bob Hagness (Tampa, US)
Just what I needed

TM runs quietly and works as it should at all speeds, thanks to new bearing, brushes and seals/gaskets. Very pleased with prompt service.

D
Doug Rogers (Atlanta, US)

Worked as should

L
Larry Slover (Grovetown, US)

Minn Kota 3-5/8" Brush Kit BRUSHKIT3.62

J
John Timmons (Granbury, US)
Minkota

Everything I needed

a
allan huriwai (Cairns, AU)
Thank you

Parts have arrived, installed, minn kota is working we are crabbing and chasing barramundi again

V
Valeri Sergejev (Tallinn, EE)

Minn Kota 3-5/8" Brush Kit BRUSHKIT3.62

L
Lynne Sandoval (Cortez, US)
Best Customer Service Ever!!!

Northland Marine is amazing!! Best customer service and knowledgeable team I have ever come across!!! Thank you for helping us get our 21year old Minn Kota engine mount trolling motor running again!! Appreciate you all and can’t recommend Northland Marine enough! We are now Loyal Customers for life!!!

P
Patrick Graham (Valparaiso, US)
The Rebuild

I've dealt with Northland Marine several times in the last five years. Each and every time, Andrew Boers has been the "go to guy" at Northland. His knowledge of Minn Kota parts and their application to specific trolling motors is truly amazing. He's a walking Minn Kota encyclopedia!! Moreover, he not only knows the motors and parts, he is absolutely amazing at helping you disassemble and reassemble the motors! I won't use any other marine dealer for Minn Kota parts. They're simply that good.

A
Adam Baughman (Saxton, US)
easy install, fast shipping

The kit is easy to install and of high quality. Took about 1 hour after I cleaned my armature. I also installed a new magnet case for a magnet was cracked. Now runs very smooth. Fast shipping to Pennsylvania. Very impressed!

J
JOSEPH PERKINS (Maumee, US)
Endura 55 rebuild

Parts all fit perfectly and motor works great.

Frequently Bought Together