Old Part Numbers: 1866400, 2774058
This kit includes everything needed to upgrade all freshwater 24 and 36 volt Minn Kota Legacy Terrova trolling motor models to the newest BT iPilot Link system made by Minn Kota. The control box assembly, control board and control board cover are included in this kit and will all need to be replaced to allow this conversion to work. Please be aware that after installing the iPilot Link system, you will no longer have use of your current foot pedal. If a foot pedal is desired, you will need to purchase p/n 2994733.
Fits the following freshwater Minn Kota trolling motor models:
Features:
Parts included with this kit:
Quantity | Part Number (Old Part Numbers) | Part Description |
1 | 2774177 (2774064) | Terrova BT iPilot Link Head Controller FW |
1 | 2292500 | Control Box Assembly FW |
1 | 1866650 (2994076) | iPilot Link BT Remote |
1 | 1866460 (2373241) | iPilot Link Charging Cable |
1 | 2884706 (2224706) | Insert Plug/Screw Kit FW |
1 | 2390800 (2370817, 2370818, 2994862, 2994862R) | Lanyard w/ Carabineer |
1 | 490389-1 (AS ECX 30E, 760025-1) | 30' Male to Female Ethernet Cable |
1 | 2397103 | iPilot Link BT Quick Reference Manual |
1 | 2324972 | iPilot Link BT Installation Instructions |
2 | 2375400 | Heat Shrink (Only needed for models equipped with US2) |
1 | 1866680 (2996400) | Heading Sensor BT |
1 | 2774069 | 24/36v Control Board Assembly |
2 | 2383428 | Screw #4-24 x 3/8" |
1 | 2320830 | Power Button/Battery Meter Locking Tab |
1 | 2326530 | Control Board Cover/Center Housing FW |
1 | 2325657 | Power Status/Battery Meter Decal FW |
In addition to the included instructions, you will need to remove the screw that holds the control box to the shaft of the trolling motor and install the new control box that is included with this kit. You will also need to remove the existing control board located underneath the control board cover at the base of the trolling motor and install the new control board and control board cover also included with this kit. These steps are not included in the installation instructions provided with the kit. Please note, after installing the new control board and control board cover there will be a power button that needs to be pressed to turn on the trolling motor. Installation instructions.
After the installation process has been completed and your trolling motor is connected to power you will need to learn the remote to the head controller. Instructions are as follows: iPilot BT Remote Pairing Instructions
* These Humminbird models will require an additional ethernet adaptor cable - AS EC QDE / 720074-1
RESOURCES:
Minn Kota iPilot Link BT Product Manual (1 of 3)
Minn Kota iPilot Link BT Product Manual (2 of 3)