Old Part Numbers: 1866205, 1866305, 2774050, 2880256, 2880271, 2990256, 2990271
This kit includes everything needed to upgrade all saltwater 12 volt Minn Kota Legacy Riptide Saltwater Terrova and RT/ST trolling motor models to the newest BT iPilot system made by Minn Kota. The control box assembly, control board and control board cover are included in this kit and will all need to be replaced to allow this conversion to work. Please be aware that after installing the iPilot Link system, you will no longer have use of your current foot pedal. If a foot pedal is desired, you will need to purchase p/n 2994733.
Fits the following saltwater Minn Kota trolling motor models:
FEATURES:
Parts included with this kit:
Quantity | Part Number (Old Part Numbers) | Part Description |
1 | 2774178 (2774051) | Riptide Terrova BT iPilot Head Controller SW |
1 | 2292501 | Control Box Assembly SW |
1 | 1866550 (2994075) | iPilot BT Remote |
1 | 2884707 (2224707) | Insert Plug/Screw Kit SW |
1 | 2390800 (2370817, 2370818, 2994862, 2994862R) | Lanyard w/ Carabineer |
1 | 2397106 | iPilot BT Quick Reference Manual |
1 | 2324971 | iPilot Installation Instructions |
1 | 1866680 (2996400) | Heading Sensor BT |
1 | 2774067 | 12v Control Board Assembly |
2 | 2383428 | Screw #4-24 x 3/8" |
1 | 2320830 | Power Button/Battery Meter Locking Tab |
1 | 2326531 | Control Board Cover/Center Housing SW |
1 | 2325658 (2325653) | Power Status/Battery Meter Decal SW |
In addition to the included instructions, you will need to remove the screw that holds the control box to the shaft of the trolling motor and install the new control box that is included with this kit. You will also need to remove the existing control board located underneath the control board cover at the base of the trolling motor and install the new control board and control board cover also included with this kit. These steps are not included in the installation instructions provided with the kit. Please note, after installing the new control board and control board cover there will be a power button that needs to be pressed to turn on the trolling motor. Installation instructions.
After the installation process has been completed and your trolling motor is connected to power you will need to learn the remote to the head controller. Instructions are as follows: iPilot BT Remote Pairing Instructions
RESOURCES:
Minn Kota iPilot BT Product Manual (1 of 5)
Minn Kota iPilot BT Product Manual (2 of 5)
Minn Kota iPilot BT Product Manual (3 of 5)
Minn Kota iPilot BT Product Manual (4 of 5)