Old Part Numbers: 2-200-240
This center housing will measure 8-1/8" in length and has an outside diameter of 4-1/2".
Fits all Minn Kota freshwater Fortrex models with 112 pounds of thrust from 2020 - Present and some models from 2019.
In June of 2019, the 112 pound lower units went through a design change. Minn Kota removed the timing key on the Center Housing and the mating Brush End Housing. (The key was there to help prevent the skag from being rotated and affecting the motor timing.) The new design better positions the O-ring against the shoulder of the Brush End Housing. If your motor is from 2019, you will need to check for the presence of the key slot in your brush end housing.
If your brush end housing DOES NOT HAVE this key slot, this is the correct p/n for your motor. If your motor does have this key slot, you will need p/n 92-200-240.
Anytime a lower unit is reassembled, the thru bolts need to be tightened to 40 - 50 inch pounds for 4-1/2" diameter lower units.
Not sure if this part will fit your Minn Kota trolling motor? Parts Diagrams