Old Part Number: 421-150, 2-300-150, 2-300-155, 92-300-150
Fits all Minn Kota freshwater motors with 112 pounds of thrust from 2014 - 2018 and many models from 2019.
Anytime a lower unit is reassembled, the thru bolts need to be tightened to 40 - 50 inch pounds for 4-1/2" diameter lower units.
In June of 2019, the 112 pound lower units went through a design change. Minn Kota removed the timing key on the Center Housing and the mating Brush End Housing. (The key was there to help prevent the skag from being rotated and affecting the motor timing.) The new design better positions the O-ring against the shoulder of the Brush End Housing. If your motor is from 2019, you will need to check for the presence of the key slot in your Brush End Housing.
If your brush end housing HAS this key slot, this is the CORRECT p/n for your motor. If your motor does not have this key slot, you will need p/n 92-300-175.
This part will come with the prop shaft seals and flange bearing already installed.
Not sure if this part will fit your Minn Kota trolling motor? Parts Diagrams
Had excellent experience with Jason while ordering parts for my Untrex trolling motor
Shipment was on time. Price was fair. Had an issue on trolling motor housing; had a crack outside of o-ring seal. Should have sent it back, but needed it ASAP for a tournament. Put it together and added a little silicone for extra measures. No leaks!
My go-to shop for Minn-Kota parts!
Excellent! Part was perfect and seller was knowledgeable. Got it quick too.
Just what I needed. Shipped out quickly!!
exactly what was needed.
It worked perfectly!
Exactly as described. A+++++