Northland Marine

Minn Kota 55# Lower Unit/Prop Kit Assembly VS FW 2887090

Part Number:  2887090

Old Part Numbers:  209-7034, 209-7063, 209-7090, 209-7094, 209-7101, 209-9031, 209-9034, 209-9035, 209-9050, 209-9051, 209-9063, 209-9064, 209-9090, 209-9091, 209-9094, 288-7094

Minn Kota Freshwater 55# Lower Unit Assembly and Prop Kit

The Weedless Wedge 2 Prop, p/n 2091160, is included with this lower unit assembly.

This lower unit is NOT compatible with Terrova models.

Parts included with this assembly:

 Quantity Part Number (Old Part Numbers) Part Description
1 421-065 (403-027, 406023, 2-300-197) Brush End Housing Assembly FW
1 2092600 Drive Pin SS 1.06"
1 2151726 5/16" Washer SS
1 2051701 Nylock Nut SS 5/16 x 24
1 2091160 (MKP-32, 1378131, 1865017) Weedless Wedge 2 Prop
1 92-100-121 (2-100-015. 2-100-115, 2-100-117, 2-100-117A 2-100-118, 2-100-121, 2-100-122, 2-100-123, 92-100-115, 92-100-117, 92-100-118, 92-100-122, 92-100-123, Core 115, Core 117, Core 118, Core 121) 55# Armature Assembly
1 140-010 (406010) Sealed Ball Bearing
1 788-015 E Clip
1 92-200-101 (406-256, 406-257, 409-253, 409-259, 431-101, 2-200-101, 7-200-101) Center Housing Assembly FW
1 92-400-101 (406-033, 2-400-101, 2-400-166, 92-400-166) Plain End Housing Assembly FW
1 144-049 (3403, 144-016, 405000, 406600) Flange Bearing
1 880-003 (406461) Prop Shaft Seal
1 880-006 (406471) Prop Shaft Seal w/ Shield
2 188-036 (186-036, 406071) Brush Assembly
1 738-036 (406403, 406406, 2-600-015, 2-600-018, 2-600-019, 2-600-202, 2-600-205, 2-600-216) Brush Plate Assembly
2 975-040 (406082, 409080) Brush Spring
1 701-081 (405470, 406470, 701081) O Ring
2 701-008 (3219, 405462, 701008) Thru Bolt O Ring
1 337-036 (337036, 406490) Gasket
1 830-007 Screw #8 x 32
2 830-042 (406353) Thru Bolt
1 990-067 (3442, 405170, 406170) Steel Washer
2 990-070 (3441, 405171) Nylon Washer
1 640-106 10 GA Red Motor Leadwire
1 640-008 10 GA Black Motor Leadwire

Not sure if this part will fit your Minn Kota trolling motor?  Parts Diagrams

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
Keith Wetherill (Sewell, US)
Good product and awesome service!

I ordered this to upgrade my 42# lower end. It came with a weedless prop. I also ordered a 54" shaft with the motor. They installed the shaft and even drilled the alignment hole for installing it to the power control head. My installation was very fast and easy. I tested everything on the lake using my Advanced GPS remote in drift mode during 15 mph wind. Everything works very well. Thank you Northland Marine!

J
John Taylor (Uvalda, US)

If you ever need anything or want to know anything about a boat this is the place to get what is needed. They are very knowledgeable on any subject and will help you get what is needed. They are fast and very responsive and reliable. I will always use them for anything that I need.

J
Joe M

5 stars fellows

K
Kevin B

Excellent service

R
Randy L

I needed an upgrade for my Minnkota 45# thrusts I pilot.
The guys in parts suggested to me to upgrade to a 55# thrust.
So I did They put the composite in for me with a small charge.
It took me 15 min to change the assembly out. It would have been nice if they would have drilled the alignment hole to install the power head control. But it was ok not a problem.