Northland Marine

Minn Kota Center Housing Assembly FW 92-200-240

Part Number:  92-200-240

Old Part Numbers:  2-200-240

Minn Kota Freshwater Center Housing Assembly for 4-1/2" Lower Units

This center housing will measure 8-1/8" in length and has an outside diameter of 4-1/2".

Fits all Minn Kota freshwater Fortrex models with 112 pounds of thrust from 2014 - 2018 and many models from 2019.

Anytime a lower unit is reassembled, the thru bolts need to be tightened within 40 - 50 inch pounds for 4-1/2" diameter lower units.

In June of 2019, the 112 pound lower units went through a design change. Minn Kota removed the timing key on the Center Housing and the mating Brush End Housing. (The key was there to help prevent the skag from being rotated and affecting the motor timing.) The new design better positions the O-ring against the shoulder of the Brush End Housing.  If your motor is from 2019, you will need to check for the presence of the key slot in your brush end housing.

Minn Kota Brush End Housing Assembly 92-300-155 Key Slot

If your brush end housing has this key slot, this is the correct p/n for your motor.  If your motor does not have this key slot, you will need p/n 92-200-250.

To rectify this change, you will receive the following parts when ordering this part number:

 Quantity Part Number Part Description
1 92-200-250 Center Housing Assembly FW
1 92-300-175 Brush End Housing Assembly FW
2 880-025 Prop Shaft Seal
1 144-017 Flange Bearing LRG
2 701-098
O Ring 4-1/2" LU
2 701-009 Thru Bolt O Ring

Not sure if this part will fit your Minn Kota trolling motor?  Parts Diagrams

Frequently Bought Together