Minn Kota 4" Brush Kit BT BRUSHKIT4.00BT
Part Number: BRUSHKIT4.00BT
Minn Kota 4" Brush Kit for Terrova BT, Ulterra, Ulterra BT, Ultrex BT, Riptide Terrova BT, Riptide Ulterra and Riptide Ulterra BT
Fits all of the following Minn Kota trolling motor models with 80 lbs of thrust, a shaft length up to 60", and a 4" outside diameter lower unit:
- Minn Kota Riptide Terrova BT 80 models from 2017 - Present. These models will be equipped with Bluetooth and Lift Assist
- Minn Kota Riptide Ulterra 80 models from 2015 - 2016
- MInn Kota Riptide Ulterra BT 80 models from 2017 - Present
- Minn Kota Terrova BT 80 models from 2017 - Present. These models will be equipped with Bluetooth and Lift Assist.
- Minn Kota Ulterra 80 models from 2015 - 2016
- Minn Kota Ulterra BT 80 models from 2017 - Present
- Minn Kota Ultrex BT 80 models from 2017 - Present
Anytime a lower unit is reassembled, the thru bolts need to be tightened within 40 - 50 inch pounds for 4" diameter lower units
Parts included in this kit:
| Quantity | Part Number [Old Part Number(s)] | Part Description |
| 2 | 188-094 (186-094) | Brush Assembly |
| 2 | 975-041 (406-083) | Brush Spring |
| 1 | 9-738-015 | Brush Plate Assembly |
| 1 | 2889460 | Seal Kit |
| 2 | 880-025 (409461) | Prop Shaft Seal |
| 2 | 701-043 (409460) | O Ring |
| 2 | 701-009 (409462) | Thru Bolt O Ring |
| 2 | 830-027 (405-341, 409-340, 409-342) | Brush Screw |
| 2 | 973-025 (405-151, 409-150) | Spacer |
| 1 | 140-010 | Ball Bearing |
| 1 | 990-045 | Thrust Spacer |
| 1 | 990-052 | Nylon Washer |
| 1 | 990-051 | Steel Washer |
| 1 | 788-040 | E Clip |
| 2 | 992-010 | Belleville Washer |
| 1 | 640-022 | Black Motor Leadwire |
| 1 | 640-126 | Red Motor Leadwire |
Applicable Minn Kota trolling motors with a 72" shaft will need BRUSHKIT4.00BT72
If your Minn Kota trolling motor is not equipped with Bluetooth, you will need BRUSHKIT4.00T or BRUSHKIT4.00(NEW)
Not sure if this part will fit your Minn Kota trolling motor? Parts Diagrams
